E4445A|Agilent E4445A|Agilent|PSA Series|Spectrum Analyzer|3Hz to 13.2GHz
Brand: Agilent Agilent
performance
*+/-0.24dB amplitude accuracy
*-155dBm/Hz displayed average noise level (DNAL)
*Phase noise at 10kHz offset: -118 dBc/Hz
*81 dB W-CDMAACLR dynamic range
Analysis bandwidth
*40 or 80 MHz analysis bandwidth supports the capture and measurement of complex signals. Check:
*-78dB (rated value) third-order intermodulation
*0.5 dBIF frequency response
*-78dB (rated value) third-order intermodulation
flexibility
* Flexible platform with 16 optional and easy-to-use built-in measurement software PSA measurement software
*The power kit can perform one-button power measurement for more than 20 wireless systems. PSA power kit one-button power measurement
describe
Complex RF and microwave signals within the measurement range of the E4440 series.
E4443A 3Hz-6.7GHz
E4445A 3Hz-13.2GHz
E4440A 3Hz-26.5GHz
E4447A 3Hz-42.98GHz
E4446A 3Hz-44GHz
E4448A 3Hz-50GHz
brand new! HSDPA/HSUPA measurement special parts
brand new! Built-in receiver special parts
View PSA High Bandwidth Digitizer Video Demo
Learn about one-button power measurement
Learn about 40/80 MHz bandwidth digitizer information
Learn more about PSA calibration software
Main features:
Dynamic Range
*-166dBm display average noise level (DANL)
*+17dBm third-order intermodulation (TOI) (+19 dBm typical)
*-116dBc/Hz phase noise (10 kHz offset) (-118dBc/Hz typical)
Precision
*±0.62 dB amplitude accuracy (±0.24 dB typical)
*±0.38 dB frequency response (±0.11 dB typical)
*±0.07 dB logarithmic amplification linearity
speed:
*Fast low-level parasitic search
*<30ms fast ACP measurement
*50 measurement/second local update rate, 45 measurement/second remote measurement
Standard features:
For more features and information, please refer to the PSA series manual
*Fully digital IF with auto range function
*Phase noise optimization
*Complete detector kit
*160 resolution bandwidth settings (10% step)
*2dB step attenuator
*FFT and sweep frequency measurement mode
*Gate pass selection sweep
*Full set of one-button power measurement
*Use the built-in CISPR and MIL standard pre-compatible EMI detector and bandwidth for EMI measurement
Optional features:
*40MHz or 80 MHz bandwidth digitizer
*Built-in preamplifier (Option 1DS: 100 kHz-3 GHz; Option 110: 10 MHz-6.7 GHz)
*Easy to use built-in special keys for PSA series measurement
*Modulation analysis and link to 89601A vector signal analysis software
13590213125
Mail
ChatNow